Project Overview
Wichita Home Works completed this kitchen remodel in Wichita, Kansas for homeowners who wanted to refresh a dated kitchen with a brighter, cleaner, and more functional design.
The original kitchen had older cabinets, open shelving, wall paneling, dated flooring, limited storage, and a layout that needed better organization. The remodel replaced those older features with new two-tone cabinetry, quartz countertops, a tile backsplash, updated flooring, new lighting, improved electrical, plumbing updates, and a more polished finish throughout the kitchen and rear entry area.
The finished kitchen has a soft, classic look with Shoji White upper cabinets, Foxhall Green lower cabinets, warm LVP flooring, Carrara-style quartz, cream-toned backsplash tile, satin nickel hardware, and a cleaner cabinet layout that makes the compact space feel more intentional and more usable.
The Homeowner’s Vision
The goal was to create a kitchen that felt brighter, more finished, and easier to use without changing the overall footprint of the home.
The existing kitchen had a more dated appearance, with older cabinetry, visible shelving, older flooring, and a ceiling and wall finish package ready for a full refresh. The plan called for removing the old cabinets and shelving, rebuilding the floor system where needed, updating the finishes, and installing a new cabinet layout that would improve storage and visual flow.
Wichita Home Works’ in-house design team helped develop the new cabinet layout, finish selections, flooring direction, backsplash design, countertop selection, trim details, lighting updates, appliance coordination, and overall project plan.
The design renderings show a refreshed kitchen with light upper cabinets, green lower cabinets, a sink centered under the window, a cleaner refrigerator wall, a range wall with upper cabinets and microwave placement, quartz counters, tile backsplash, and warm wood-look flooring.
Scope of Work
Wichita Home Works coordinated the project from demolition and subfloor preparation through cabinetry, finishes, final trade work, cleaning, and final walkthrough.
The project included:
Demolition and Framing
The project began with removal of the existing sink faucet, sink, garbage disposal, countertops, upper and lower cabinets, wall paneling, ceiling light, ceiling texture, baseboards, casing, flooring, rear entry flooring, door stop moulding, jambs between the kitchen and rear entry, and kitchen subfloor/slats.
After demolition, the floor joists were prepped for new subfloor installation. New 3/4-inch tongue-and-groove OSB was installed with adhesive, and pine door jambs were installed between the kitchen and back entryway.
This early work created a stronger foundation for the new flooring, cabinetry, and finish package.
Plumbing, Electrical, and HVAC
The plumbing scope included replacing shutoff valves for the kitchen faucet, relocating drains as needed for the undermount sink, combining drains for a single-basin sink, installing the customer-provided dishwasher, setting the sink faucet, installing a garbage disposal, and installing a new P-trap.
The selected plumbing fixtures included a Delta Linden single-handle pulldown faucet in Arctic Stainless and an InSinkErator Badger 5 garbage disposal.
Electrical work brought the kitchen up to current functional needs with new circuits, LED puck lights on three-way switches, dedicated circuits for the microwave, disposal, dishwasher, range, and appliance outlets, code-compliant countertop outlets, refrigerator outlet, standard wall outlet, and white switches and devices.
The HVAC scope included relocating the ceiling vent to work with the new cabinet layout and installing a new duct for the range vent through the exterior wall.
Drywall, Cabinets, and Countertops
Drywall work included shimming walls as needed, installing new drywall where removed during demolition, mudding, taping, smoothing walls for paint, repairing the ceiling after electrical and HVAC rough-in, skim coating the ceiling, priming, and applying knockdown texture.
The kitchen received Koch Express cabinets with Windsor-style shaker doors and five-piece drawer fronts. The upper cabinets were finished in Shoji White, while the lower cabinets were finished in Foxhall Green. The cabinets included plywood construction, soft-close hinges and slides, rollout trays, crown molding to the ceiling, and refrigerator panels on both sides of the refrigerator space.
A site-built poplar shelf was added between two upper cabinets above the sink, creating a simple custom detail in the new layout. The countertop package included MSI Quartz Carrara Breve with an eased edge and a 27-inch undermount single-bowl stainless sink.
Backsplash, Flooring, Paint, and Finishes
The backsplash was finished with Emser Passion Glossy Creama 3×8 tile in a 1/3 stagger brick pattern, Schluter Trendline Ivory jolly edging, Ultracolor Bone grout, and matching caulk.
The kitchen and rear entry landing received Shaw Pantheon HD Natural Bevel Honeycomb LVP flooring, installed east to west. The flooring scope also included stairnose pieces at the steps, a Honeycomb stair tread, an end cap transition between the kitchen and living room, vapor barrier, floor leveling as needed, and perimeter caulking.
Painting included PVA primer on the walls, Kilz primer on the ceiling and wood trim areas, flat white ceiling paint, Sherwin-Williams Natural Tan walls, color-matched trim paint to coordinate with the upper cabinets, and paint on the floating shelf. Satin nickel Bell Castle cabinet knobs and pulls completed the cabinetry.
Design and Finish Details
This kitchen has a soft transitional style with classic cabinet lines and a calm, updated color palette.
The Shoji White upper cabinets brighten the space and help the ceiling-height cabinetry feel lighter. The Foxhall Green lower cabinets add depth and personality without making the kitchen feel dark. Together, the two-tone cabinet layout gives the room a custom, designed look.
The MSI Carrara Breve quartz countertops add a clean stone-inspired surface, while the Emser Passion Glossy Creama backsplash brings warmth and subtle texture. The Shaw Pantheon HD Honeycomb LVP flooring adds a natural wood tone that softens the white and green cabinet palette.
The satin nickel hardware, Arctic Stainless faucet, undermount stainless sink, and updated lighting keep the finished kitchen practical, cohesive, and easy to maintain.
Construction Story
The construction process started with removing the existing kitchen finishes and preparing the room for a complete reset. The project involved subfloor repair, drywall work, cabinet installation, flooring, painting, countertop installation, tile work, final plumbing, final electrical, HVAC range vent work, appliance coordination, and final cleaning.
Daily logs show the project moving through drywall repairs, ceiling scraping, cabinet delivery, cabinet installation, countertop template, flooring installation, painting, countertop installation, backsplash installation, final plumbing, final electrical, appliance delivery coordination, and final walkthrough preparation.
As cabinetry was being installed, the team addressed field conditions in the existing home. The sink-side exterior wall had a bow that required wall adjustment so the base cabinet could sit properly, and the ceiling in one corner was slightly unlevel, which was addressed with scribe molding and filler details.
The team also worked through a cabinet and venting coordination issue at the range area. The microwave cabinet height differed from layout expectations, and the hood vent path needed to be notched and routed through the cabinet area. Later daily logs note that the HVAC team custom-made the hood vent box inside the cabinet and tested it successfully.
During backsplash work, the homeowners had concerns about lighter tile variation. The team discussed options, and the homeowners chose to move forward with the existing tile to avoid delaying the project. The installer limited the use of the lighter-colored tile, and the homeowners were happy with the finished look.
By the final site check, the homeowners were very happy with the finished product. Final walk, final photos, and cleaning were scheduled, with only a couple of small finish items left to address.
Challenges Solved
Smaller Kitchen Layout
The kitchen had a compact footprint, so the design had to make smart use of each wall. The new cabinet layout improved storage, added rollout trays, created a cleaner refrigerator wall, and used ceiling-height upper cabinets to maximize usable space.
Existing Wall and Ceiling Conditions
During cabinet installation, the team found that part of the sink wall was bowed and that one ceiling area was slightly unlevel. These conditions were addressed through field adjustments, scribe molding, and filler details so the new cabinetry would install cleanly.
Range Vent Coordination
The new range vent needed to work within the cabinet layout. The team adjusted the cabinet area and coordinated a custom HVAC vent box so the hood vent could function properly.
Tile Color Variation
The backsplash tile had some lighter pieces that gave the homeowners pause during installation. The team reviewed the issue, discussed options, and installed the backsplash using a limited amount of the lighter tile to keep the project moving while still delivering a result the homeowners liked.
Trade Sequencing
The final stages required careful sequencing between countertops, backsplash, plumbing, electrical, appliance delivery, HVAC, finish touch-ups, cleaning, and final walkthrough.
The Finished Result
The finished Ridgewood kitchen feels brighter, cleaner, and more tailored to the home. The two-tone cabinetry gives the room a more custom look, while the quartz countertops, tile backsplash, LVP flooring, and updated trim create a cohesive finish.
The kitchen now has better storage, updated lighting, improved electrical, a new sink and faucet, new flooring, a refreshed rear entry connection, and a softer color palette that makes the space feel more open and welcoming.
For a smaller kitchen, the transformation is significant. The remodel shows how layout refinement, cabinet planning, color selection, and finish coordination can make an older kitchen feel more current without needing a large addition or full footprint change.
Why This Project Matters for Future Kitchen Remodel Clients
This project is a strong example for homeowners who want to remodel a compact or older kitchen while keeping the project focused and practical.
It shows that a kitchen does not have to be large to feel custom. Thoughtful cabinet planning, updated lighting, durable flooring, quartz countertops, a coordinated backsplash, and careful finish details can dramatically improve the way a kitchen looks and functions.
For homeowners near Wichita, Derby, Andover, Bel Aire, Eastborough, College Hill, and surrounding communities, this project shows how Wichita Home Works can help modernize a dated kitchen while managing the construction details that happen behind the scenes.
Thinking About a Similar Kitchen Remodel?
If you are planning a kitchen remodel near Wichita, Wichita Home Works can help you think through the full project.
That includes cabinet layout, storage needs, appliance placement, sink location, flooring, countertops, backsplash, lighting, electrical updates, plumbing, ventilation, trim, paint colors, timeline expectations, and final finish details.
A kitchen remodel has many moving parts. The right design-build team helps organize those decisions into a clear, manageable process from planning through completion.
FAQs
Does Wichita Home Works remodel smaller kitchens?
Yes. This project is a strong example of a smaller kitchen remodel where the existing footprint was improved with better cabinetry, updated finishes, new flooring, new lighting, and improved storage.
What cabinet colors were used in this kitchen?
The upper cabinets were Shoji White, and the lower cabinets were Foxhall Green. This two-tone palette helped brighten the room while adding depth and character.
What countertops were installed?
The kitchen used MSI Quartz Carrara Breve countertops with an eased edge and an undermount single-bowl stainless sink.
What backsplash tile was used?
The backsplash was Emser Passion Glossy Creama 3×8 tile installed in a 1/3 stagger brick pattern with Ivory edging and Bone grout.
What flooring was installed in the kitchen?
The kitchen and rear entry landing received Shaw Pantheon HD Natural Bevel Honeycomb LVP flooring.
Did this remodel include electrical and plumbing updates?
Yes. The project included updated kitchen circuits, LED puck lights, code-compliant outlets, range and appliance circuits, sink plumbing updates, a new faucet, garbage disposal, and dishwasher final set.
Did Wichita Home Works provide design services for this kitchen?
Yes. Wichita Home Works’ in-house design team helped plan the cabinet layout, color palette, flooring, backsplash, countertop selection, lighting updates, trim details, and finish coordination.
What style is this kitchen remodel?
This project has a soft transitional style, combining shaker cabinetry, two-tone finishes, quartz countertops, warm LVP flooring, satin nickel hardware, and a classic tile backsplash.
Who is a good fit for this type of kitchen remodel?
This type of remodel is a good fit for homeowners who want to update a dated kitchen, improve storage, replace cabinets, add quartz countertops, update flooring, improve lighting, and create a more cohesive kitchen without expanding the footprint.